The MIDI File Format

MIDI File Structure


MIDI files are structured into chunks.

Each chunk consists of:

4 bytes 4 bytes length bytes

There are two types of chunks:

Header Chunks
which have a chunk type of "MThd"
Track Chunks
which have a chunk type of "MTrk"

A MIDI file consists of a single header chunk followed by one or more track chunks.

Since the length-field is mandatory in the structure of chunks, it is possible to accomodate chunks other than "MThd" or "MTrk" in a MIDI file, by skipping over their contents. The MIDI specification requires that software be able to handle unexpected chunk-types by ignoring the entire chunk.

MThd 6 <format> <tracks> <division>
MTrk <length> <delta_time> <event> ...
MTrk <length> <delta_time> <event> ...

Value Representations

Within a MIDI file, there is a variety of information in addition to the basic MIDI data, such as delta-times and meta-events.

Where such information contains numeric values, these are generally represented in one of two formats:


Binary values are stored:

(unless otherwise specified)

Variable Length Quantities

The variable-length quantity provides a convenient means of representing arbitrarily large integers, without creating needlessly large fixed-width integers.

A variable-length quantity is a represented as a series of 7-bit values, from most-significant to least-significant. where the last byte of the series bit 7 (the most significant bit) set to 0, and the preceding bytes have bit 7 set to 1.

ValueVariable Length representation
-abcdaaaabbbbccccdddd100000aa 1aabbbbc 0cccdddd-
0000 0000
0111 1111
0000 0000
0111 1111
00000000 10000000
00111111 11111111
10000001 00000000
11111111 01111111
81 00
100003E811 1110 100010000111 0110100087 68
1000000F42401111 0100 0010 0100 000010111101 10000100 01000000BD 84 40

As you can see from the above examples, small values (0-127) can be represented by a single byte, while larger values are also accomodated.

The largest value allowed within a MIDI file is 0FFFFFFF. This limit is set to allow variable-length quantities to be manipulated as 32-bit integers.

Header Chunks

The data part of a header chunk contains three 16-bit fields. These fields specify the format, number of tracks, and timing for the MIDI file.

The length of the header chunk is 6-bytes. However, software which reads MIDI files is required to honour the length field, even if it is greater than expected. Any unexpected data must be ignored.

Header Chunk
Chunk TypelengthData
4 bytes
4 bytes
(32-bit binary)
<-- length (= 6 bytes) -->
MThd<length><format> <tracks><division>

length in bytes of the chunk data part.
This is a 32-bit binary number, MSB first.
This will be exactly 6 (bytes) for any MIDI file created under the MIDI 1.0 specification. Nevertheless, any MIDI file reader should be able to cope with larger header-chunks, to allow for future expansion.

The MIDI file format.
This is a 16-bit binary number, MSB first.
The only valid formats are 0, 1 and 2.

The number of track chunks contained in this MIDI file.
This is a 16-bit binary number, MSB first.

This defines the default unit of delta-time for this MIDI file.
This is a 16-bit binary value, MSB first.

This may be in either of two formats, depending on the value of MS bit:

Bit:1514 ... 87 ... 0
<division>0ticks per quarter note
1-frames/secondticks / frame

bit 15 = 0:
bits 0-14
number of delta-time units in each a quarter-note.

bit 15 = 1:
bits 0-7
number of delta-time units per SMTPE frame
bits 8-14
form a negative number, representing the number of SMTPE frames per second. Valid values correspond to those in the MTC Quarter Frame message.

   -24 = 24 frames per second
   -25 = 25 frames per second
   -29 = 30 frames per second, drop frame
   -30 = 30 frames per second, non-drop frame

MIDI File Formats

MIDI files come in 3 variations:

Format 0 MIDI Files

Format 0 MIDI files consist of a header-chunk and a single track-chunk.

The single track chunk will contain all the note and tempo information.

Format 1 MIDI Files

Format 1 MIDI files consist of a header-chunk and one or more track-chunks, with all tracks being played simultaneously.

The first track of a Format 1 file is special, and is also known as the 'Tempo Map'. It should contain all meta-events of the types Time Signature, and Set Tempo. The meta-events Sequence/Track Name, Sequence Number, Marker, and SMTPE Offset. should also be on the first track of a Format 1 file.

Format 2 MIDI Files

Format 2 MIDI files consist of a header-chunk and one or more track-chunks, where each track represents an independant sequence.

Track Chunks

The data part of a track chunk contains one or more <delta_time> <event> pairs. The <delta_time> is not optional, but zero is a valid delta-time.

Track Chunk
4 bytes
4 bytes
(32-bit binary)
<-- length bytes -->
(binary data)
MTrk <length> <delta_time> <event> ...

is the number of 'ticks' from the previous event, and is represented as a variable length quantity

is one of:


Notice that there are no explicit delimiters between the <delta_time> and <event> instances.
This is possible because both the delta-times and events have clearly defined lengths:

MIDI Events

A <midi_event> is any MIDI Channel message. This includes:

Running status is applicable within MIDI files in the same manner as usual. Running status is cancelled by any <sysex_event> or <meta_event>

Sysex Events

Where is is desirable to include messages other than MIDI Channel messages in a MIDI file (System Exclusive messages in particular), the <sysex_event> can be used.

Sysex events come in two flavors:
Sysex Events
F0 <length> <sysex_data> F0 Sysex Event

This results in a F0 being sent (Start-Of-Exclusive), followed by <sysex_data>

<length> is a variable length quantity, specifying the length of <sysex_data>
<sysex_data> F0 <sysex_data>
is sent as a MIDI message.
F7 <length> <any_data> F7 Sysex Event (or 'escape')
This results in exactly <any_data> being sent, without anything else being added.
<length> is a variable length quantity, specifying the length of <any_data>
<any_data> <any_data>
is sent as a MIDI message.

In both cases, the End-Of-Exclusive message, F7, is not sent automatically. It must be specified explicitly within <sysex_data> or <any_data>.

Most System Exclusive messages are quite simple, and are sent as a single packet of bytes, starting with F0 and ending with F7. These are easily accomodated using the F0 form of the <sysex_event>

However, some System Exclusive messages are used to control device parameters in real-time, and what is syntactically a single System Exclusive message may consist of a series of small parts which must be sent with appropriate delays. Hence it is necessary to be able to break up a single message into a number of events, with appropriate delta-times. This can be accomodated by using the F7 form of the <sysex_event>.

In fact, the F7 Sysex Event can be used to included any data into the MIDI stream, such as MIDI System Real-Time messages (though this is generally not desirable).

Example 1:
To generate the message:
F0 7E 09 03 01 01 F7
(Sample Dump Request - Device 9, sample number 257)
the <sysex_event> would be:
F0 06 7E 09 03 01 01 F7
or alternately:
F7 07 F0 7E 09 03 01 01 F7
Example 2:
The MIDI System Real-Time message 'stop' can be inserted using
the <event> F7 01 FC, while 'continue'. would be F7 01 FB.

Suppose you wanted to pause an external drum machine by sending a 'stop', followed 48 delta-time units later by 'continue'. The complete delta-time/event sequence would look something like this:

  00 F7 01 FC 30 F7 01 FB

Meta Events

Meta Events are used for things like track-names, lyrics and cue-points, which don't result in MIDI messages being sent, but are still useful components of a MIDI file.

Meta Events have the general form:

FF <type> <length> <data>


is a single byte, specifying the type of meta-event.
The possible range is 00-7F. Not all values in this range are defined, but programs must be able to cope with (ie ignore) unexpected values by examining the length and skipping over the data portion.

is the number of bytes of <data> following.
This is a variable length quantity
0 is a valid <length>

zero or more bytes of data
Meta Events
FF 00 02 ss ss Sequence Number
This is an optional event, which must occur only at the start of a track, before any non-zero delta-time.

For Format 2 MIDI files, this is used to identify each track. If omitted, the sequences are numbered sequentially in the order the tracks appear.

For Format 1 files, this event should occur on the first track only.

ss ss Sequence Number, 16 bit binary
FF 01 <len> <text> Text Event
This event is used for annotating the track with arbitrary text.
Arbitrary 8-bit data (other than ascii text) is also permitted.
<len> length of <text> (variable length quantity)
<text> <len> bytes of ascii text, or 8-bit binary data
FF 02 <len> <text> Copyright Notice
This event is for a Copyright notice in ascii text.
This should be of the form "(C) 1850 J.Strauss"

This event should be the first event on the first track.

FF 03 <len> <text> Sequence/Track Name
Name of the sequence or track
FF 04 <len> <text> Instrument Name
A description of the instrument(s) used on this track.
This can also be used to describe instruments on a particular MIDI Channel within a track, by preceding this event with the meta-event MIDI Channel Prefix. (or specifying the channel(s) within the text).
FF 05 <len> <text> Lyric
Lyrics for the song.
Normally, each syllable will have it's own lyric-event, which occurs at the time the lyric is to be sung.
FF 06 <len> <text> Marker
Normally on the first track of a format 1 or format 0 file.
Marks a significant point in the sequence (eg "Verse 1")
FF 07 <len> <text> Cue Point
Used to include cues for events happening on-stage, such as "curtain rises", "exit, stage left", etc.
FF 20 01 cc MIDI Channel Prefix
Associate all following meta-events and sysex-events with the specified MIDI channel, until the next <midi_event> (which must contain MIDI channel information).
cc MIDI channel 1-16
Range: 00-0F
FF 2F 00 End of Track
This event is not optional.
It is used to give the track a clearly defined length, which is essential information if the track is looped or concatenated with another track.
FF 51 03 tt tt tt Set Tempo
This sets the tempo in microseconds per quarter note. This means a change in the unit-length of a delta-time tick. (note 1)

If not specified, the default tempo is 120 beats/minute, which is equivalent to tttttt=500000

tt tt tt New tempo, in us/quarter-note
24-bit binary
FF 54 05 hh mm ss fr ff SMTPE Offset
This (optional) event specifies the SMTPE time at which the track is to start.
This event must occur before any non-zero delta-times, and before any MIDI events.

In a format 1 MIDI file, this event must be on the first track (the tempo map).

hh mm ss fr hours/minutes/seconds/frames in SMTPE format
this must be consistant with the message MIDI Time Code Quarter Frame (in a particular, the time-code type must be present in hh)
ff Fractional frame, in hundreth's of a frame
FF 58 04 nn dd cc bb Time Signature
Time signature of the form:
eg: 6/8 would be specified using nn=6, dd=3

The parameter cc is the number of MIDI Clocks per metronome tick.

Normally, there are 24 MIDI Clocks per quarter note. However, some software allows this to be set by the user. The parameter bb defines this in terms of the number of 1/32 notes which make up the usual 24 MIDI Clocks (the 'standard' quarter note).

nn Time signature, numerator
dd Time signature, denominator expressed as a power of 2.
eg a denominator of 4 is expressed as dd=2
cc MIDI Clocks per metronome tick
bb Number of 1/32 notes per 24 MIDI clocks (8 is standard)
FF 59 02 sf mi Key Signature
Key Signature, expressed as the number of sharps or flats, and a major/minor flag.

0 represents a key of C, negative numbers represent 'flats', while positive numbers represent 'sharps'.

sf number of sharps or flats
-7 = 7 flats
0 = key of C
+7 = 7 sharps
mi 0 = major key
1 = minor key
FF 7F <len> <id> <data> Sequencer-Specific Meta-event
This is the MIDI-file equivalent of the System Exclusive Message.

A manufacturer may incorporate sequencer-specific directives into a MIDI file using this event.

<len> length of <id>+<data> (variable length quantity)
<id> 1 or 3 bytes representing the Manufacturer's ID
This value is the same as is used for MIDI System Exclusive messages
<data> 8-bit binary data


Note 1
In the case where the value of <division> (in the header chunk) defines delta-time units in 'ticks per quarter note' (MSbit=0), a change in tempo means a change in the length of a unit of delta-time.

In the case where <division> MSbit=1, and the 'ticks' are defined in absolute terms (ticks/frame and frames/second), it is not clear from the specification what effect a new tempo should have.

Previous midi_system_exclusive.html Up Contents Next further_reading.html

Please note this Disclaimer